Notice: Product Images may differ from the actual product. Image may be a representation of this item.
Piston Ring Set – 3.504 in. Bore – 0.0472 in. Top / 0.0472 in. 2nd / 0.079 in. Oil – 4 Cyl.
Your Price: $226.46
SKU: JG1204-3504
Call for Availability
–
Piston Ring Set, 4 Cyl., File Fit, 0.0472 in. Carbon Steel PVD Top Ring, 0.0472 in. Carbon Steel Phosphate Second Ring, 0.0787 in. Carbon Steel Nitride Low Tension Oil Ring, Each.
JE Piston Rings are designed to maximize horsepower through precision sealing of combustion pressure. They are offered in a huge selection of sizes, various materials, and in multiple thicknesses to suit a wide variety of engines. JE Pistons also offers an array of custom piston ring services including back cutting, dyke cutting, lapping, grinding, and PVD coating. These services, the same used by top NHRA Pro Stock and NASCAR teams, are now available to the public and offer tremendous gains in durability, power through reduced friction, and improved ring seal.
GTIN: 00193564225511
Bore Diameter | 3.504|89.00 MM |
---|---|
Ring Type | 3 Ring |
File Fit | Yes |
Top Ring Axial Height | 1.20 MM |
Top Ring Radial Width | 0.120 IN |
Top Compression Ring Thickness | 0.0472 IN |
Top Ring Facing Material | PVD |
Top Ring Material | Carbon Steel |
Top Ring Shape | Barrel Face, Back Cut |
Second Ring Axial Height | 1.20 MM |
Second Ring Radial Width | 0.118 IN |
Second Compression Ring Thickness | 0.0472 IN |
Second Ring Facing Material | Phosphate |
Second Ring Shape | Napier, Back Cut, Neutral |
Oil Ring Axial Height | 2.00 MM |
Oil Ring Radial Width | 0.126 IN |
Oil Ring Thickness | 0.079 IN |
Third Ring Facing Material | Carbon Steel |
Third Ring Material | Carbon Steel |
Third Ring Shape | Flex Vent |
Ring Set Thickness | 0.0472 in. Top x 0.0472 in. 2nd x 0.079 in. Oil |
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a NEGATIVE number (-0.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a POSITIVE number (0.000)
Note: For a DISH piston – value in box must be a NEGATIVE number (-0.0)
Note: For a DOME piston – value in box must be a POSITIVE number (0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.