Wrist Pin – 0.687 in. Diameter – 2.250 in. Length – 0.120 in. Wall – H13 Material
Piston Wrist Pin, H13 Tool Steel Alloy, 0.687 in. Diameter, 2.250 in. Length, 0.120 in. Wall, Chamfered End, Each.
|Wrist Pin Material||
H13 Tool Steel Alloy
|Wrist Pin Outer Diameter||
|Wrist Pin Length||
|Wrist Pin Wall Thickness||
Instructions: Enter a value in the un-shaded boxes below as they pertain to your engine.
Note: For pistons BELOW the block @ TDC – value in box must be a NEGATIVE number (-0.000)
Note: For pistons ABOVE the block @ TDC – value in box must be a POSITIVE number (0.000)
Note: For a DISH piston – value in box must be a NEGATIVE number (-0.0)
Note: For a DOME piston – value in box must be a POSITIVE number (0.0)
Note: Manipulate the DOME/DISH & PISTON to DECK volumes to get the ratio you want.